WC67K Hydraulic Press Brake 300T6100
E21 2 Axis 300Ton NC Crowning Bending
█ General Features:
• Steel welded machine frame and top beam with optimum strength and minimum deflection.
• Full welded structure machined on CNC Boring&Milling machine.
• Mechanical Synchronous,Ram parallelism is guaranteed by using a heavy duty anti-torsion bar system, this solid torsion links both ends of the ram and maintains parallelism throughout the entire stroke, which also have adjusting device.
• Maximum hydraulic pressure protected by safety switch with read-out
• Limit switch protection for back gauge and bending depth
• Compact hydraulic mono-block with pressure relief valves for safety
• Heavy Duty 6m conventional press brake design
• Hydraulic Manual Crowning table, here have 3 units compensation cylinders mounted on lower beam, which have pressure gauge read-out when bending different thick metal plate, operate can adjust the crowning value.
█ Standard Equipment:
• Swinging Control of Y&X, 2 axis ESTUN E21 NC controller
• NC controller,X&Y two axis, Made in china
• Manual Hydraulic crowning system, three units compensation cylinders
• Siemens electric components
• Ball screw and linear guide Motorized back gauge
• Motorized cylinder stopper
• T-Slots of the table
• Standard upper punch and Muti-V lower die
• Standard foot pedal with emergency stop buttons
• German EMB fuel pipe union
• Seals: Japan NOK
█ Optional Equipment:
• DELEM, CYBELEC, ESA CONTROLLER
• CE light guard and Laser guard
• European and American type tools
• Servo motor and drive controlled, fast and accurate X&Y axis positioning
• Manual or motorized mechanical crowning system
• Ball screw and linear guide back gauge
• Heavy duty automatic back gauge
• Bigger throat depth, like 500mm-1000mm with different bending capacity
• Longer back gauge stroke, up to 1000mm
• Extra finger stops
█ Technical Specifications:
WC67K Hydraulic Press Brake 300T6100 | |
Bending Power | 300 Ton |
Max Bending Sheet Metal thickness | 10mm |
Bending Length | 6100mm |
Distance between side frames | 5000mm |
Y Axis Stroke | 250mm |
Max Ram Daylight opening | 590mm |
Throat depth | 500mm |
X back gauge stroke | 1000mm |
Main motor power | 30kw |
Gross Weight | 27T |
Dimensions(L*W*H) | 6500*2000*3100mm |
• Delivery time: Within 30 days
• Payment term: T/T, 30% down payment in advance and balance before shipment
• Warranty: 18 months
• Loading port: Shanghai, China
• Certificate: ISO, special requirements for CE conformity
• After Sales Service: 7*24 hours, quick response
• Shipping: one 40 ft open top container
• Installation Service and Training Service are all available if required
• Customer’s profile testing before shipment